Contact CEMCO





The Streamline range
Chemical Clean Surface Treatment system

To download a brochure in PDF format click here

The Cemco Streamline Range Pat Pend. horizontal processor has been configured as a copper surface treatment system. The Streamline’s use of non-metallic rollers permit the use of Alkaline or Acid based pre-cleaning and Micro-Etch chemistries. Cemco’s unique self contained Streamline Fluid engines Pat Pend.  allow close proximity location to the cleverly designed fluid-knife rinse heads and thereby providing short process footprints.

Uniformity of surface topography is achieved by means of a laminar flow movement of liquid within the Streamline Fluid Engines Pat Pend.. A number of options are available including configuration for single or multiple stage surface cleaning, automatic dosing, loading and unloading.
Feed Conveyor with drive motor
Acid Pre-clean
Three-stage Cascade water Rinse
Micro Etch Surface prep
Three-stage Cascade water Rinse
Panel Drier
Exit Conveyor

Conveyor speed : 0.5 - 1.0 m/minute
(higher if required)
Conveyor working width : 510mm and 610mm
Panel size : Min 305mm x 150mm
                     Max. 610mm width
Panel thickness : 0.05 (inners) plus copper up to 6.0mm
Overall length : 3.8 mtr approx
Overall Width : 1287mm
Voltage : 400V.
Frequency : 50 Hz.
Water consumption (rinsing) : 3-6 ltrs/min aprox mains x 2
                                                   3-6 ltrs/min Di throughput dependent


High efficiency, non-contact, Streamline Fluid
Engines. Pat Pend.
All polypropylene fabrication
Easy access sliding covers
Easy clean removable sumps
8 Roller process containment
EPDM conveyor rollers used throughout for improved wear resistance and chemical compatibility
All gears are manufactured from PVDF
Direct drive, low torque transport system
Siemens PLC control with touch-screen interface
automatic fault detection etc.
Installation pack including bund tray, extraction
ducts, drain and water manifolds etc.
Can be located against a wall
Small footprint
Low power
Low water consumption
Simple fast maintenance procedures
Quick, easy access
Flexible and rigid transport capability
Low fluid losses
No roller wheel marks or staining