Flexural Fatigue Tester:

To download a brochure in PDF format click here

The Cemco Flexural Fatigue Tester is designed to enable testing in accordance with IEC 326-2 test method 21a for assessing the ability of a flexible printed circuit to withstand flexing that might occur during normal use.

The test sample is fitted between a static plate and a reciprocating table, and adjusted to the recommended flex radius and travel. When switched on, the machine will cycle until a break in circuit continuity of one microsecond is detected, or the preset counter time has elapsed.

Key Benefits:

• Computer control for easy set-up and operation
• Detects discontinuity as short as 1 microsecond
• Protection against misreading caused by temporary power failure
• Tests two samples at the same time
• Can be set up to 999,999 cycles
• Robust construction, minimum maintenance

Technical Specification:

Electrical Requirements: 110/120 or 220/240 volt, 50/60 Hz, 100 watt
Discontinuity: 1 microsecond or greater
Cycle Pre-set: up to 999,999 cycles
Reciprocating Speed: 10 C.P.M.
Loop Dia. Adjust 6-30 mm (0.2"-1.2")
Stroke: 50-75 mm (1.9"2.9")
Dimensions: 675W x 590D x 550H mm (27" x 23" x 22")
Weight: 18 Kg (40 lbs)